Technical Data - Fisher Scientific Power Overhead Stirrer Manuel D'instructions

Technical Data

Voltage
Installation Category
(in accordance with IEC664)
Maximum Current Draw
Maximum Output Power
Speed Range
Speed Readout
Speed Readout Accuracy
Torque Readout Accuracy
Maximum Viscosity
Maximum Volume
Maximum Operating Noise
Motor Type
Drive
Hollow drive shaft
Chuck Guard
Seals
Holding chuck
Mounting Rod Length
Stirrer Weight
Protection measures:
Class Protection device
0 No additional protection
The operating conditions should be monitored at regular intervals.
120 volts @ 60 Hz
II
3 Amps
1/5 hp, 150 watts
20-3000 rpm
LCD 4 digit display
+/- 1 rpm or +/- 1% of reading
+/- 12 N-cm (1 in-lb) or +/- 5% of reading
50,000 mPas (50,000 cPs)
60 litre (15.85 US Gal.)
70 dB(A) at 1 meter
Brushless DC
2 stage transmission
Nitrated P .30 with 10 mm (0.39") diameter
bore for stirring impellers
13 mm (0.51") outside diameter for drive chuck
Length 67 mm, (2.64")
Diameter 54 mm, (2.13")
Molded of clear chemical resistant
polyurethane.
Butyl Rubber
IP 42
3 prong stainless steel. Maximum opening
10 mm (0.39") diameter
140 mm, (5 1/4")
5 kg, (11 lbs.)
0
Recommended use
Used only on equipment where failure of the
controls does not represent a hazard.
8
8
220 volts @ 50/60 Hz
II
3 Amps