Troubleshooting - SilverCrest SDM 1500 B2 Mode D'emploi

Troubleshooting

Programme
The appliance is
not working.
The appliance
produces no steam.
The pump makes
unusually loud
noises.
A whitish edge
forms on the floor
when the appliance
stops briefly during
operation.
SDM 1500 B2
Possible causes
The plug is not connected.
The "Steam" button
not been pressed.
There is no water in the
water tank .
The filter is blocked.
No steam setting has
been selected.
There is no water in the
water tank .
Lime has collected.
Possible solutions
Connect the appliance to a
mains power socket.
has
Press the "Steam" button
Fill the water tank
tap water.
Change the filter
Use the MODE button
select the desired level of steam.
Fill the water tank
tap water.
Wipe the limescale away with a
damp cloth. If necessary, add a
little descaler onto the cloth.
.
with
.
to
with
│
13 ■
GB│IE