ResMed Power Station II Mode D'emploi page 6

Indicators
Refer to illustration B.
The RPS II provides LEDs to indicate its current operating state.
LED indicator
Battery charge level
One amber flashing (audible alert
beeps continuously)
One green flashing (audible alert
beeps for 10 sec)
One green continuous
Two green continuous
Three green continuous
Four green continuous
Charging (B-7)
Flashing green
Constant green
DC on/off (B-8)
Flashing blue
Constant blue
Audible alert mute (B-5)
Flashing blue
Constant blue
1
When setting the DC on/off switch, the charge level indicator may fluctuate between different levels.
To check the battery charge level, press the charge level check button (B-2) on the
control panel. The number of green LEDs indicates the approximate charge level.
To mute the alert, press the audible alert mute button (B-1). To permanently mute,
press and hold the audible alert mute button (B-1) for 5 seconds. To deactivate, press
the audible alert mute button (B-1) when the mute is still active.
(B-6)
1
Status
Less than 5%
Less than 10%
10% to 40% (approximate)
40% to 65% (approximate)
65% to 90% (approximate)
Greater than 90% (approximate)
Charging
Fully charged
RPS II turned on but not discharging
RPS II turned on and discharging
Not discharging and mute is active
Discharging and mute is active
English 3