Intended Use; Control Panel - ResMed Power Station II Mode D'emploi

English

Intended use

The ResMed Power Station II (RPS II) is an external lithium-ion battery that provides
power when mains power is unavailable.
Please read the entire guide before using the RPS II. Refer to the device user guides
for intended patients, uses, environment where used, and contraindications associated
with CPAP , bilevel and ventilation therapy.
RPS II at a glance
Refer to illustration A.
The RPS II system comprises the following components:
1. Battery
2. Power supply unit adapter
3. Carry bag
Available separately:
4. 90W AC power supply unit or DC converter
5. AC or DC power cord
6. DC output cable
7 . Air 10 Power supply unit adaptor
Note: To recharge the RPS II using an Air 10 power supply unit (supplied with Air 10
devices) or the Air 10 DC converter, an Air 10 power supply unit adaptor is required
(part no. 37342).
Optional accessory:
8. Battery coupler (packed with Velcro
Compatible devices and accessories
Refer to the following list on www.resmed.com/downloads/devices:
• Battery/Device Compatibility List for all compatible devices for RPS II
• Power Supply Unit/Device Compatibility List for a list of compatible power supplies
for RPS II
• Ventilation Accessories for a list of compatible accessories
If you do not have internet access, please contact your ResMed representative.
For more information on setting up your devices, see your device user guide.

Control panel

Refer to illustration B.
The control panel of your battery includes the following:
1. Audible alert mute button
2. Charge level check button
3. DC on/off switch
4. DC input/output port
5. Audible alert mute indicator
strap)
™
6. Battery level indicators
7 . Charging indicator
8. DC switch/discharging indicator
9. Voltage output selector switch
(rear panel)
English 1