Description Of The Unit; Operation; Information On The Screen - Astralpool EASYWATCH Manuel D'installation Et De L'utilisateur

EASYWATCH

3 DESCRIPTION OF THE UNIT

DESCRIPCIÓN EASYWATCH (32460)
1 PVC inlet ball valve D20 mm
2 PVC sloping seat filter D 20
3 Analysis chamber
4 Gauging cap of the analysis chamber
5 pH electrode
6 RedOx potential electrode
7 ¼" drain tap (sampler)
8 PVC outlet ball valve D20 mm
9 pH electrode wire
10 RedOx potential electrode wire

4 OPERATION

Before starting-up the Easywatch, it is recommended for the water to have between
7- 7.6 units of pH and 1-1.15 ppm of CI or 2-3 ppm of Br.

4.1 INFORMATION ON THE SCREEN

The first line indicates the time and the selected
operating mode, OFF, ECO, Normal 1, Normal
2 and Super.
The second line shows a graph indicating the
operation of the swimming pool filtering pump:
a continuous line indicates that the pump is off
and a moving wave indicates that the pump is
on.
CONTROL AND ADJUSTMENT UNIT FOR
RESIDENTIAL SWIMMING POOLS 32460
32460 -EASYWATCH
ANALYSIS CHAMBER
1 Analysis chamber
2 Water outlet
3 Water inlet
4 Equipotential
5 EPDM O-ring
6 Gauging cap
7 Inlet of pH, ORP or PTC1000 electrodes
Access a second information screen by pressing
the Info key. This screen indicates the pH and
RedOx potential values measured, the preset
values appear in brackets. An * between both
values indicates that the corresponding corrector
product is being dispensed.
If you do not press any key, the screen light will
automatically turn off after 30 minutes (5 minutes
in OFF mode).
ENGLISH
USER
MANUAL
8