Selecting A Language; Manual Dispensing Of Additives; Setting The Time; Maintenance - Astralpool EASYWATCH Manuel D'installation Et De L'utilisateur

EASYWATCH
Let the reading stabilise. Once it reaches 100%, "OK"
appears indicating that the reading is now stable.
Confirm the gauge by pressing the Calibration
key, or cancel gauging by pressing the info key.
If no key is pressed in 5 minutes, the gauging
process is cancelled.
Once gauging has finished, close the ¼" drain
valve (sampler) and open the shutoff water cock
so that water circulates through the probe fitting.

4.4 SELECTING A LANGUAGE

The language key enables you to sequentially change
the language in which Information is displayed. (Spa-
nish, English, French, Italian, Portuguese and German).

4.5 MANUAL DISPENSING OF ADDITIVES

(pH AND DISINFECTANT CORRECTOR)
Press the Parameters button to enter the menu from
where you can manually apply the dose of additives.
One press on the + key activates pH corrector dis-
pensing, one more press deactivates pH dispensing
and activates RedOx dispensing, one more press
activates both at the same time. To deactivate them,
simply press the "-" key. The screen displays the time
in seconds that it has been dispensing and automa-
tically stops on reaching 300 seconds.

4.6 SETTING THE TIME

Use the Time key to set the time of the internal
clock. With keys and
you want to modify the hours or the minutes, and
then make the modification with keys + and -.
Note: If the power supply to the unit is shut off
for prolonged periods of time (more than 10
days), you may have to reset the time.

5 MAINTENANCE

5.1 START-UP

The unit is ready to use pH reducer. If increaser is
required instead of reducer, proceed as follows:
Select and press parameters. Manual dispen-
sing screen will appear.
Press the key.
A screen will appear and on the first line: "pH
Regul. type". The second line indicates:
"Reduce pH".
Press the + and - keys to change the second line bet-
ween "Reduce and Increase" and select what is
required depending on the pH corrector to be used.
CONTROL AND ADJUSTMENT UNIT FOR
RESIDENTIAL SWIMMING POOLS 32460
you can select whether
32460 -EASYWATCH
4.7 INDICATIONS OF THE PILOT LIGHTS
Blue: Indicates that the water is in good condi-
tion depending on the operating mode selec-
ted. If the instructions are not followed, the pilot
remains on for a period of time during which
the unit considers it can recuperate optimum
conditions.
Red: Indicates that an alarm has occurred,
which can be turned off by pressing the Info key
(Alarm reset) or once the incident, which caused
the alarm, has been solved.
Alarms
EEProm not started-up: It detects that the
memorised parameters have not been
correctly started-up or are not reliable.
pH/RedOx reading is not stable: The reading
of the probes varies in an uncontrolled man-
ner.
Incorrect gauging of the pH or RedOx pot:
The results of the gauging indicate that the
probes are faulty or that an error has occu-
rred in the gauging process.
The pH readings do not vary as expected in
accordance with the type and amount of
corrector liquid dispensed.
The RedOx potential readings do not vary as
expected in accordance with the type and
amount of corrector liquid dispensed.
When one of the alarms is triggered, a text will
appear on the lower line giving information on the
alarm, the red Led starts to flash and the alarm
relay will connect. The alarm will turn off once the
cause has been solved or by pressing the Info key.
Once the type of pH corrector has been selec-
ted, press the Info button to return to the main
screen.

5.2 MAINTENANCE OF THE ELECTRODES

All electrodes are checked before dispatch.
During the day, leave the electrodes in a preserving
solution (KCI 3M) or in tap drinking water.
Before using the electrodes, check that they are
free of scale, dirt or crystallisation. If the electrodes
have any of these anomalies, submerge them in
HCI 3% cleaning solution for 2 minutes.
ENGLISH
USER
MANUAL
10