Technical Specifications Of Mach 4 Uni; Options; Guarantee - Cassese MACH 4 UNI Mode D'emploi

USER MANUAL
Z1791:
Green round clamp
1.D

TECHNICAL SPECIFICATIONS OF MACH 4 UNI

Minimum moulding width:
Maximum moulding width :
wedge types :
Machine gross weight :
Dimensions :
Power supply:
Air Supply :
Average consumption per cycle :
1.E

OPTIONS

Z25147:
Stainless steel shelf for
wedges and accessories
1.F

GUARANTEE

One year guarantee for parts and labor against manufacturing defects. Wearing parts* and those damaged as a
result of non-appliance with the instructions of the present manual are excluded from the guarantee.
*Chevron rubbers, round clamps and wedge driver blades are considered as wearing parts.
Z1783:
Yellow round clamp
5mm (3/16") / Minimum moulding height : 7 mm (1/4")
150 mm ( 5 29/32") / Maximum moulding height : 100 mm ( 4 13/32" )
Maximum stroke between first and last wedge (at 45°) : 190 mm (7 31/64")
5, 7, 10, 12 and 15 mm (5mm wedges can be fired with 7mm stapling head)
for softwood, hardwood & MDF. Use only Masters™ "UNI" wedges.
97 kg .
Width 668mm (2ft 219/64'') x Depth 589mm (1ft 113/16") x Height 1171mm (3ft 107/64'').
110/230V, 50/60 Hz, single-phase, Consumption : 500W.
compressed air 6-7 bars
2 Nl at 6 bars (we consider one cycle is a corner with 2 positions and 1 wedge per position)
Barcode reader (Contact
the customer service)
Barcode reader (Contact the
MACH 4 UNI
9