Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
7.E
REMOVING THE HAMMER
Locate the 2 little
screws holding the
hammer and loosen
them of 2 turns using
the 2.5mm Allen key.
From the top, remove
the hammer of the
machine.
7.F
LUBRICATING THE DISTRIBUTOR HEAD
Allen key N2.5mm
Inspect the hammer
making sure it doesn't
show any damage.
Apply
a
layer
of
grease around it and
install it back in the
machine
as
per
attached picture
.
Lock
back
the
2
holding screws of the
hammer.
Push the hammer up
with your fingers.
Figure 7-9
Figure 7-10
Grease tube, Cassese reference Z1896
Using
the
Allen key, push down
the hammer.
Figure 7-11
Figure 7-13
2.5mm
MACH 4 UNI
Figure 7-8
Figure 7-12
42
Publicité
Table des Matières
Dépannage
