Gsimple Screen: Memorising A Profile - Cassese MACH 4 UNI Mode D'emploi

USER MANUAL
It is also possible to
go directly at a
desired position by
touching the position
number. A keypad
will allow you to
select directly the
position.
5.G SIMPLE SCREEN: MEMORISING A PROFILE
After having proceeded to the programming of the machine ( refer to chapter 5.F SIMPLE SCREEN: PROGRAMMING A PROFILE
page 25 ), it is possible to memorize the profile so it can be executed next time without having to program it again. This can't be
done from the simple screen, but it can be done from advanced screen, even if the programming was done from the simple
screen.
The simple and advanced screen are linked together, any modification in one screen will affect the
other one, so you can swap at any moment from simple to advanced screen without loosing your
parameters.
Press the main menu
button.
If the frame is
octagonal or
hexagonal type, then
touch the 45° button
several times until
the right angle is set.
Figure 5-38
Then press
ADVANCED
or STANDARD button
to return
simple screen.
Figure 5-39
If the
should
spacers
spacer bars button
several
achieve
setting.
Refer to chapter I.4.C
SPECIFIC USE OF THE
SPACER BARS (page
15) to know when
use of
Figure 5-41
recommanded.
the
button
to the
operator
use the
touch the
times to
the right
spacer is
MACH 4 UNI
Figure 5-40
Figure 5-42
26