Section 4. Pool Water Preparation; Determining Pool Size (Gallons Or Litres Of Water In Your Pool) - Zodiac Nature2 Fusion Manuel D'installation Et De Fonctionnement

Page 12
ENGLISH
4. Install a 3-way valve in the return line to allow
water to be diverted/restricted to the vessel and
water feature line.
5. Fully open any closed valves, including the 3-way,
to allow unrestricted flow to the vessel and water
feature line.
6. Hand tighten all unions, sensors, and collars.
CAUTION
Be careful not to get finger caught between inlet
union and plug when tightening as this may cause an
injury.
7. Start the pump and allow water to pass through the
newly plumbed system. Check for leaks.
8. Make sure the flow rate to the Nature
not drop below 114 lpm (30 gpm).

Section 4. Pool Water Preparation

4.1

Determining Pool Size (Gallons or Litres of Water in Your Pool)

C (g) =
C (l) =
1. Choose the shape (rectagular, circular, or oval) that closest matches the shape of your pool.
2. Use the provided formula (gallon or liter) to calculate the water capacity of your pool.
Zodiac Nature
®
Fusion does
2
Rectangular Pool
C (g) = L (ft) x W (ft) x d (ft) x 7.5
C (l) = L (m) x W (m) x d (m) x 1000
W
D1
(D1 + D2) / 2 =
Circular Pool
Ø1
Ø2
(ft) x (ft) x d (ft) x 5.9
Ø1 Ø2
(m) x (m) x d (m) x 790
Ø1 Ø2
|
2® Fusion Inground Installation and Operation Manual
L
d
D2
Oval Pool
sd
C (g) = LD (ft) x sd (ft) x d (ft) x 5.9
C (l) = LD (m) x sd (m) x d (m) x 790
LD