TaoTronics TT-BH047 Mode D'emploi page 6

Note:
1. If your earbuds failed to pair with each other, please restore to
factory settings as per the instructions below:
1) Place the earbuds into the charging case, tap and hold the Touch Control
of both earbuds for 10 seconds until the LED indicators flash twice to
enter reset mode.
2) Take out both earbuds, and they will pair with each other automatically.
Pair them with your device when the LED indicator on the right earbud
flashes blue and that on the left earbud flashes blue and white alternately.
3) If you have paired your device with the earbuds before, remove
"TaoTronics TT-BH053" from the bluetooth device list and pair again.
2. Extra attention is needed when wearing the earbuds to avoid
accidental tapping of the Touch Control.
3. It is not recommended to wear the two earbuds on different people.
If need to do so, please keep the 2 earbuds within 9.8ft in couple
earbuds mode.
4. The volume cannot be adjusted in single earbud mode.
Warning
·Never dismantle or refit the product to avoid malfunction or fire hazards.
·Keep away from corrosive liquids to avoid damages to the product.
·Keep away from extreme temperatures.
·Keep away from children and pets.
·Don't use the product in thunderstorm weather to avoid malfunction
or electric shock.
FAQ
Q: Failed charging of the charging case.
A: Make sure the charging cable is intact and plugged in properly.
Q: Signal of the earbuds is unstable and there is no sound in the earbuds.
A: Please wear the earbuds properly and put your phone in the front
pocket when using it outdoor.
Q: Two devices named "TaoTronics TT-BH053" are found.
A: Delete both names and search again.
Q: Sound is unclear.
A: Increase the volume slowly on your phone and earbuds and keep
them close to each other.
Q: What's the effective range between the two earbuds?
A: Around 3 meters / 9.8 feet.
05/06