Wiring Diagram - Vortice HRI-E Notice D'emploi Et D'entretien

ENGLISH
displayed using the UP and DOWN buttons and
selected with the SET button.
- FAnE: enable separate control of exhaust speed; the
parameter can be attributed one of two values,
displayed using the UP and DOWN buttons and
selected with the SET button:
On: separate control enabled;
OFF: separate control disabled.
NOTE: if FAnE is set to OFF, any changes made to S1_E,
S2_E, S3_E will be ignored by the system, which
maintains the default values:
HRI E-ONE HRI E-TWO
S1_E= 50 S1_E= 30
S2_E= 60
S2_E= 75
S3_E= 100
S3_E= 100
Menu FAn (fig.10)
10 10
1 2
Press the SET button to access the "FAn" menu; the
following menu options can be displayed using the UP
and DOWN buttons, and selected with the SET button:
- S1_S: minimum supply and exhaust speed setting; the
parameter can be attributed values from 40(HRI E-
ONE), 30(HRI E-TWO), 40(PHANTOM) to S2_S,
displayed using the UP and DOWN buttons and
selected with the SET button.
- S2_S: medium supply and exhaust speed setting; the
parameter can be attributed values from S1_S to
S3_S, displayed using the UP and DOWN buttons and
selected with the SET button.
- S3_S: maximum supply and exhaust speed setting;
the parameter can be attributed values from S2_S to
100, displayed using the UP and DOWN buttons and
selected with the SET button.
- FAn: setting that determines which of the 3 preset
speeds must be used by the appliance (min-med-
max): the parameter can be attributed values "0", "1"
or "2", displayed using the UP and DOWN buttons
and selected with the SET button.
HRI-E TWO
HRI-E ONE
S1_E= 30
S1_E= 50
S2_E= 75 S2_E= 60
S3_E= 100
S3_E= 100
The speed selected by way of the Fan parameter (1, 2
or 3) will be indicated by the arrows at the bottom of
the display, which light up above 1 (MIN), above 1 and
2 (MED) and above 1, 2 and 3 (MAX), respectively.
12
PHANTOM
S1_E= 50
S2_E= 80
S3_E= 100
SKP10
3 4 5 6 7
PHANTOM
S1_E= 50
S2_E= 80
S3_E= 100

Wiring diagram

11 11
3x0.35
esc
set
nero / black
blu / blue
marrone / brown
FREE CONDUCTOR
PROPERLY INSULATE
ISOLARE IL TERMINALE
DOPO AVER RIMOSSO
SKP10
black/ GND
blue / signal
brown +12Vdc