Orla CDP 10 Notice D'utilisation page 9

Using the (/\) and (\/) DATA buttons it is possible to transpose the instrument in the desired
key according to the following table
G G# A
-5 -4 -3
For example, transposing to E:
- Press the (/\) button four times (four semitones).
- As soon as the button is pressed, the display will show
If the new key is A#:
- Press the (\/) button two times (two semitones).
- As soon as the button is pressed, the display will show:
At Power Up the instrument returns to the original tuning.
NOTE The
PITCH
In those cases where transposition by semitones is not enough, and a more accurate tuning is
necessary, it is still possible to change pitch.
1 - Push the PITCH button.
2 - Push the (/\) or (\/) to match the required frequency.
At Power Up the instrument returns to the original tuning.
A# B C
-2 -1
E
A
symbol is to indicate the
C# D
0 1 2
#
symbol
9
D#
E F
3 4 5
F#
6