Orla CDP 10 Notice D'utilisation page 10

SOFT/SOSTENUTO/SUSTAIN PEDAL
The CDP10 Digital Piano has a set of three pedals giving the following functions:
SOFT:
SOSTENUTO:
SUSTAIN:
SONG RECORDER – SEQUENCER
It is possible to store one complete song in two separate Tracks or two songs into two Tracks.
How to store a Sequence:
1 - Press Track 1 - its Led is On -.
2 - It is possible to start now with or without Metronome, with the selected Time
Signature as seen in the METRONOME paragraph. Start playing your own music as
soon as you are ready, and the Sequencer will start storing the data as soon as the
first key is pressed.
At the end of your recording just press Track 1 again to store the song.
3 - It is possible to record a new song in Track 2 in
in Track 2 a second part of the same song, press Track 1 first and Track 2 afterwards.
Track 1 will be in Play mode and Track 2 will be in Record mode.
4 - At the end of recording of Track 2, switch both Track 1 and Track 2 to end
recording.
5 - To play back Track 1 and Track 2 simultaneously switch them on and press the
PLAY button.
NOTE -
Soft
gives the piano voices a ''softer'' sound.
this allows only the notes pressed on the keyboard before the Sostenuto pedal
is activated to sustain and no subsequent notes played afterwards.
has the same function as the ''sustain'' pedal on the piano. It provides sustain
and lets the sound slowly decay after the keys have been released.
RECORDER___________
TRACK 1 TRACK 2
When a Track is recorded and stored it is necessary to allow a couple of
seconds before pressing the PLAY button. This give the time to the internal
computer to properly store the Song Data.
Sustain
Sostenuto
PLAY
10
the same way. If you want to store