Menu Settings - JVC KD-T812BT Guide De Démarrage Rapide

Menu Settings

1
Press and hold to enter menu settings.
2 Turn the volume knob to select an item, then press the knob.
3 2
Repeat step until the desired item is selected/activated.
4
Press to exit.
To return to the previous setting item, press
• Refer to the INSTRUCTION MANUAL on the following website for the
detailed explanation of each item: <http://www.jvc.net/cs/car/>
• The availability of each item vary depending on the model.
Menu items
: Selects a preset equalizer or adjusts your own sound
[EQ SETTING]
settings.
[AUDIO CONTROL] : Sets your preferred audio settings.
[SOUND EFFECT] : Sets your preferred sound effect.
: Sets your preferred control for the display window.
[DISPLAY]
[TUNER SETTING] : Settings for radio source.
[BT MODE] : Settings for using a Bluetooth device.
: Settings for using smartphone to control this unit.
[REMOTE APP]
[MIC GAIN]*1 : Sets the sensitivity of the microphone.
: Adjusts the noise reduction level.
[NR LEVEL]*1
[ECHO CANCEL]*1 : Adjusts the echo cancellation delay time.
: Settings for this unit.
[SYSTEM]
[CLOCK] : Adjusts the clock.
[ENGLISH] : Selects language for the menu and music information.
: Selects language for the menu and music information.
[РУССКИЙ]
[ESPANOL] : Selects language for the menu and music information.
: Selects language for the menu and music information.
[FRANCAIS]
[DEUTSCH]*2 : Selects language for the menu and music information.
: Activates or deactivates the display demonstration.
[DEMO MODE]
*1 Applicable only while talking on the phone.
*2 Only for KD-T812BT.
Examples of some well-used settings
1
2
.
3
4
5
6
7
Subwoofer Level Setting
Press and hold to enter menu settings.
Turn the volume knob clockwise to select [AUDIO CONTROL], then press
the knob.
Turn the volume knob clockwise to select [SUBWOOFER SET], then press
the knob.
Turn the volume knob clockwise to select [ON], then press the knob.
Turn the volume knob clockwise to select [SUB.W LEVEL], then press the
knob.
Press the volume knob if [PRE-OUT] is shown on the display.
Turn the volume knob to adjust the subwoofer level, then press the knob.
Continued on the next page...
7