SAS LS6T-52HU Mode D'emploi page 81

GB
Air sealed in hydraulic system
while operating
Oil leaks
Bleed screw is not tightened
around
before moving the log splitter
cylinder ram or
from other Oil drain bolt with dipstick is not
points tight.
Hydraulic control valve
assembly and/or seal(s) worn.
DISPOSAL
Do not dispose of power tools into household waste! According the
European Guideline 2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that
are no longer usable must be collected separately and disposed of in
an environmentally correct manner.
Never dispose the residual fluids into household waste too. It must be collected
separately and disposed of in an environmentally correct manner too.
Loosen bleed screw by some
rotations before operating the
log splitter
Tight the bleed screw up
before moving the log splitter
Tighten the oil drain bolt with
dipstick
Contact the dealer
19