Technical Specifications - SAS LS6T-52HU Mode D'emploi

GB

TECHNICAL SPECIFICATIONS

Model
Voltage:
Power consumption
No load Speed:
Classification
Protection degree
Max. splitting force (tons)
Diameter
Length
Max. Hydraulic oil capacity
Max. hydraulic pressure
Mass
Sound pressure level, L
Sound power level, L
Vibration
Noise/Vibration Information
Measured sound values determined according to EN 609-1.
Vibration total values (triax vector sum) determined according to EN 609-1:
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 609-1and may be used to
compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
pA
WA
LS6T-52HU
230V~ 50Hz
2100W S3 50% (5min on/5min off)
2,800min
-1
Class I
IP 54
6 t
30-250mm
520mm
2.4L
24MPa
51 g
K
78 dB(A) k=3dB(A)
89 dB(A) k=3dB(A)
≤2,5m/ s 2
7