Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
It is important not to insist when the log does not split on the first attempt,
as the pump may be damaged by the overheating of the oil when the
machine is made to work under the maximum stress in the attempt to split
excessively hard wood.
Fig.1
3. Recommended oils
We recommend use of the following oils for the hydraulic cylinder.
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
MOBILE DTE 11 OR equivalent
DO NOT USE OTHER GRADE OILS
4. Application conditions
This log splitter is a home use model. It is designed for operating under ambient
temperature between +5
0
C and 40
0
C and use at altitudes no more than 1000mm.
The surrounding humidity should less than 50% at 40
0
C. It can be stored or
transported under ambient temperatures between -25
C and 55
C.
0
0
ASSEMBLY
Warning! For your own safety, do not connect the log splitter to the power
source until the machine is completely assembled and you read and
understand the entire instruction manual.
Warning! For your own safety, never forget to bolt the support legs to the
log splitter, place the log splitter on flat and level ground.
Warning! Never use the log splitter if it is not in perfect order or if it needs
servicing. Before starting work, check correct functioning of all the safety
devices (ZHB, push button).
10
Publicité
Table des Matières
