SAS LS6T-52HU Mode D'emploi page 76

GB
DO NOT ADJUST THE MAX PRESSURE
LIMITING SCREW (16) IN FIG. 8!
Max pressure was set before the log splitter ex work and the max pressure
limiting screw is tightened to ensure the log splitter works under pressure
no more than 6 tons. The setting was done by qualified mechanic with
professional instruments.
Unauthorized resetting will cause the hydraulic pump fail to output enough
splitting pressure or RESULT IN SERIOUS INJURY AS WELL AS DAMAGE
TO THE MACHINE.
Fig. 8
Make sure that the screws are tightened up properly before operation the
log splitter!
This log splitter is equipped with control system that requires to be operated by
both hands of the user – left hand controls the hydraulic control lever (3) while
right hand controls the push button switch (5) as shown in Fig. 9. The log splitter
will freeze upon absence of either hand. Only after both hands release the
controls, the log pusher starts to return backward to the starting position.
Never force the log splitter for more than 5 seconds by keeping pressure on
it to split excessively hard wood.
14