Sharing The Machine With Other Network Users; Using Ethernet - Canon imageRUNNER 1750i Guide De L'utilisateur

CAUTION
• Before you connect the USB cable to the machine while the main power switch
is ON, make sure that the ground line is connected. If the ground line is not
connected, connecting the USB cable to the machine while the main power
switch is ON may result in electric shock.
• If you connect or disconnect the USB cable while the main power switch is ON,
do not touch the metal parts around the connector. Doing so may result in
electric shock.
IMPORTANT
2
• To prevent your machine or computer from operating poorly, do not connect or
disconnect the USB cable in the following situations:
- The drivers are being installed.
- The computer is booting up.
- The machine is printing.
• If you disconnect the USB cable from the machine or computer that is turned ON,
always wait at least 10 seconds before reconnecting the cable. Immediately
reconnecting the cable may cause your machine or computer to operate poorly.
• Make sure that the Use USB Device setting is enabled. (See Chapter 7, "Other
System Settings," in the System Settings Guide.)
• With the USB connection, you cannot use the Remote UI or the Remote Scan
function. Some utilities are also not functional if the machine is connected to a
computer via the USB cable.
NOTE
The appropriate USB interface for Windows 2000/XP/Vista/7/Server 2003/Server
2008 is USB 2.0 Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For Mac OS X
10.3.2 or earlier is USB Full-Speed (USB 1.1 equivalent) and Mac OS X 10.3.3 or later
is USB 2.0 Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For more information,
consult your local authorized Canon dealer.

Sharing the Machine with Other Network Users

The machine supports TCP/IP, which enables it to be shared by multiple network
users. The machine supports both 10BASE-T and 100BASE-TX connections that
can be used in most LANs.

Using Ethernet

Connect the machine's LAN port to a hub port using the following types of cable:
- When connecting to a computer with a 10BASE-T port: a Category 3 (or higher)
twisted pair LAN cable
- When connecting to a computer with a 100BASE-TX port: a Category 5 (or
higher) twisted pair LAN cable
2-10
Cable Connection