Safety Notes; General Safety Notes; Electrical Safety; Weights - Leica Microsystems FS C Manuel D'utilisation

2. Safety Notes

2.1 General Safety Notes

This safety class 1 device is constructed
and tested in accordance with EN 61010-1/IEC
1010-1, safety regulations for electrical measur-
ing, control, and laboratory devices.
Caution!
In order to maintain this condition and to en-
sure safe operation, the user must follow the
instructions and warnings contained in this
operating manual.
Caution!
The devices and accessories described in
this operating manual have been tested for
safety and potential hazards.
The responsible Leica affiliate or the main
plant in Wetzlar must be consulted whenev-
er the device is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this manual.
Unauthorized alterations to the device or
noncompliant use shall void all rights to any
warranty claims!

2.2. Electrical Safety

General Specifications
For indoor use only.
Supply voltage:
Frequency:
Power input:
Fuse (power supply):
Fuse (power pack):
Ambient temperature:
Relative humidity:
Overvoltage category:
Pollution degree:

2.3 Weights

Comparison bridge:
Macro stand with stage:
Motorized work table:
2. Safety Notes
90-250 V~
50-60 Hz
maximum 125 VA
F 6,3 A L 250 V -UL-
T 16 A L 250 V
10-36°C
maximum 80% to 30°C
II
2
15 kg
32 kg
50 kg
7