Publicité
Les langues disponibles
Les langues disponibles
BLUETOOTH MODE
Pairing Bluetooth with your mobile phone
1.
Press the ON/OFF button to turn on the speaker.
2. Select Bluetooth mode by pressing the SOURCE/LOCK button.
3. The LCD display will show "Pairing" when Worktube is not yet paired with your mobile phone.
4. In your mobile phone open the Setting menu and select Bluetooth, then select "Worktube" in the Bluetooth devices list
(Bluetooth pairing instructions may vary per type of mobile phone, please check your mobile phone manual).
5.
When Bluetooth pairing is successful, the LCD display will show "Connected" for a few seconds. Then the Bluetooth icon will
stop flashing, and your Bluetooth device name will be shown on display.
Playing music from your mobile phone
1.
Press the ON/OFF button to turn on the speaker.
2. Select Bluetooth mode by pressing the SOURCE/LOCK button.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the SELECT/INFO/BT ST, TUNING ◄◄ or ►► buttons on
the speaker.
5. After music playback started, the name of the song will be displayed in the LCD.
Device List – Bluetooth
In Bluetooth mode, the speaker can display the current connected device and the devices which had successfully connected before.
The device names would be shown if the name of the Bluetooth devices were configured in the mobile devices. Please refer to the
user manual of your mobile device for the configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the MENU/PRESET button to enter the system setting.
2. Press the TUNING ◄◄ or ►► buttons until "Device list" is displayed; press the SELECT/INFO/BT ST button.
3. Press the TUNING ◄◄ or ►► buttons to view the name of the devices.
17
Note: There can be up to 8 device names to be stored in the speaker. If there are more than 8 mobile devices have been connected
and stored into the speakers, the earliest paired device name will be erased.
Note: If your mobile device cannot be connected to the speakers by Bluetooth, please try to delete the "Worktube" from your mobile
device, and pair to this speaker again. For how to remove the existing Bluetooth speaker - "Worktube" from your mobile device,
please read the user manual of your mobile device for further assistance.
Device List – Connect to the paired device
In the speaker, you can select the Bluetooth device from the device list to connect again.
The device names would be shown if the name of the Bluetooth devices were configured in the mobile devices. Please refer to the
user manual of your mobile device for the configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the MENU/PRESET button to enter the system setting.
2. Press the TUNING ◄◄ or ►► buttons until "Device list" is displayed; press the SELECT/INFO/BT ST button.
3. Press the TUNING ◄◄ or ►► buttons to view the name of the devices.
4.
Press the SELECT/INFO/BT ST button to start Bluetooth reconnection. The speaker will automatically connect to this mobile
device.
Note: There can be up to 8 device names to be stored in the speaker. If there are more than 8 mobile devices have been connected
and stored into the speakers, the earliest paired device name will be erased.
Note: If you have ever deleted the "Worktube" from your connected mobile device, the auto reconnection will be unsuccessful.
Restart Bluetooth paring
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the MENU/PRESET button to enter the system setting.
2. The LCD will show "Bluetooth Discoverable", press the SELECT/INFO/BT ST button.
3. The LCD display will show "Pairing" and the Bluetooth icon will be flashing. The Worktube will disconnect from the existing
Bluetooth device, and played a disconnection tone. Then Worktube's Bluetooth is free for any mobile phone connection as it is
in discoverable mode now.
GB
GB
18
Publicité
Chapitres
