Before Using The Appliance The First Time; Preparing The Appliance For Operation - Unold RONDO Notice D'utilisation

7. Never place the appliance directly under an electrical outlet, and ensure
that the power socket used is easily accessible at all times.
8. Check whether the power cord is routed in such a manner that no one can
stumble over it.
9. The power cord should not touch any housing parts, this could cause the
cable to melt.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safeguards. Keep
packaging materials away from children – danger of suffocation!
2. Check whether all listed accessory parts are present and intact.
3. Comply with all instructions that are specified in the chapter, "The ideal
location", and find a suitable location.
4. When you use the appliance for the first time, or if it has not been operated
for an extended period of time, a slight odour can occur.

PREPARING THE APPLIANCE FOR OPERATION

1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
3. Plug the mains plug of the appliance into an electrical outlet (220-240 V~,
50/60 Hz).
4. Select the desired function on the rotary function regulator:
Heating operation
- Level "I" for less heat
- Level "II" for more head
For heating operation select the desired temperature via the rotary thermo-
stat regulator, by turning the regulator. The regulator is variably adjustable.
The indicator light shows the mode.
5. The appliance heats until the desired temperature is reached, then the
appliance switches off. The appliance will switch on again as soon as the
room temperature drops below the set temperature.
Copyright UNOLD AG | www.unold.de
(approx. 1,000 watt)
(approx. 2,000 watt)
23