Bluetooth Device Settings - JVC KW-AVX836 Manuel D'instructions

Bluetooth device settings

Menu item
1
Dial Menu *
Phone Connect*
Audio Connect*
Phone Disconnect*
Audio Disconnect*
Delete Pairing
New Pairing
Auto Connect
Auto Answer
SMS Notify
Add Phonebook
MIC Setting
Phone Volume
1
*
Only for the device connected for Bluetooth phone.
* 2
When a device has already been connected to the unit, <Phone Connect> and <Audio Connect> do not appear
and vice versa.
Bluetooth
Selectable setting/item
Select a calling method, then select the desired item to call. (
2
/ Only for the registered devices.
2
Select a device from among the registered devices, establish the connection
with it.
2
/ Only for the device being connected.
2
Disconnect the current device before connecting another device.
( 36)
( 35)
When the unit is turned on, the connection is established automatically
with...
Off : No Bluetooth device.
♦
Last : The last connected Bluetooth device.
♦
Off : The unit does not answer the calls automatically. Answer the
♦
calls manually.
On : The unit answers the incoming calls automatically.
♦
Off : The unit does not inform you of the arrival of a message.
♦
On : The unit informs you of the arrival of a message by ringing
♦
and displaying "Receiving Message."
You can copy the phone book memory of a mobile phone into the unit.
( 40)
Adjust the volume of the microphone connected to the unit.
01/02/03
♦
Adjust the phone volume.
00 to 30 or 50, Initial 15
♦
• The adjustable range depends on the amplifier gain control. (
Bluetooth
Dial Menu
Device Menu
Settings
42
Enter
Enter
Enter
Initial: Underlined
39)
33)