Pvp X6Ip Led Module Removal With Mt-02 - Chauvet Professional PVP X6IP Mode D'emploi

PVP Module Care and Replacement
Access Security Screw
PVP X6IP LED Module
Removal with MT-02
Service Access Latches
1. Orient the product on a flat table as shown.
2. Unscrew the Access Security Screw.
3. Unlatch and open Service Access Door
4. Loosen the 2 thumb screws securing the module to the frame.
5. Carefully attach the MT-02 to the front and center of the module to be removed. Use
the knob on the MT-02 to secure it to the module.
PVP X6IP User Manual, Rev. 4 23