Chauvet Professional PVP X6IP Mode D'emploi page 22

Mounting
M12x20
M12x50
Lock Washer
Flat Washer
1. Placement of brackets onto 1"
(25mm) steel square tube
4. Lastly, after checking that all brackets are in the proper
placement, insert the M12x20 screws into the center
threaded hole to tighten and secure panels in place.
14
Method 2: Mounting to Steel Tubing
1" (25 mm) heavy-duty square steel tube or equivalent must be purchased separately. See Bracket
Dimensions for absolute sizing.
Ensure any mounting surface you plan to use is capable of supporting the
weight of all panels being mounted. Use all pertinent mounting points.
The illustrations above are examples only. Please refer to all applicable
local codes and regulations for the proper installation of the product.
2. Align brackets and steel tube to
securely connected panels.
3. Insert M12x50 screws into
mounting holes x4, using a steel flat
washer and steel lock washer for
each. See Image above for bracket
placement
PVP X6IP User Manual, Rev. 6