Chauvet Professional PVP X6IP Mode D'emploi page 21

M12x50
M12x20
Lock Washer
Flat Washer
3. Lastly, insert the M12x50 screws into
the center threaded hole to tighten and
secure panels in place on struts.
PVP X6IP User Manual, Rev. 4
Method 1: Mounting to Steel Struts (or other surfaces)
Steel struts or equivalent mounting surface must be purchased separately. See Bracket Dimensions for
absolute sizing.
1. Use M12x20 screws, with both a lock washer and flat washer, to attach
brackets flush onto securely connected panels. See images
2. Placement of
brackets onto 1"
(25mm) steel square
tube
Ensure any mounting surface you plan to use is capable of supporting the
weight of all panels being mounted. Use all pertinent mounting points.
The illustrations above are examples only. Please refer to all applicable
local codes and regulations for the proper installation of the product.
Mounting
13