Publicité
Les langues disponibles
Les langues disponibles
10
CONTENTS
1
General
2
Operating principle
3
Permitted applications
4
5
Lifting
- FHX,FHSX, TDH, TNMH
- THSK
6
7
- THSK
- TNMH
8
9
10
11
1
GENERAL
Congratulations with the acquisition of your Terrier safety plate lifting clamp.
The quality systems of management and services of Terrier Lifting Clamps BY fully comply
with ISO 9001 standards. The many years of vast experience are a guarantee of optimum
quality and safety. Terrier Lifting Clamps are made of top quality alloyed steel and fully
comply with European standards as laid down in Machine Directive 2006/42/EG.
2
OPERATING PRINCIPLE
The FHX, FHSX, FHSX-V, TNMH and THSK horizontal safety lifting clamps have specifically
been designed for the horizontal lifting and transporting of non-bending steel plates. The
clamps consist of a body, cam, and cam pin. The cam also functions as a lifting shackle and
ensures that the load is held firm-ly while it is being lifted.
3
PERMITTED APPLICATIONS
FHX, FHSX, FHX-V and TNMH
Terrier FHX, FHSX and TNMH lifting clamps are only suitable for lifting and horizontal move-
ment of non-bending steel plates and structures where it is possible to position the clamp
on a flat point of contact. The clamps should always be used in pairs, or multiples thereof.
In the latter case, however, preferably with a load spreader beam.
TDH
Terrier TDH lifting clamps are only suitable for lifting and horizontal movement of both
bending steel plates and formed steel plates, where it is possible to position the clamp on
a flat point of contact. TDH clamps should always be used in pairs, or multiples thereof.
THSK
Terrier THSK clamps are only suitable for horizontal movement of steel plates and packages
of steel plates, where it is possible to position the clamp on a flat point of contact. The
11
11
11
12
13
14
14
15
15
16
16
16
16
17
11
Publicité
Chapitres
