Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Working safely with the
measuring tool is possible
only when the operating and
safety information are read
completely and the instructions
contained therin are strictly
followed. Never make warning
labels on the Measuring tool
unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny reflective
sheet steel or similar reflective
surfaces are not recommended
for laser use. Reflective surfaces
could direct the beam back
towards the operator.
Take care to recognize the
accuracy and range of the
device. Measurement may not be
accurate if used beyond the rated
range of the device.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
The use of optical instruments
with this product will increase
eye hazards.
Safe Operating Procedures
Be sure to read and understand
all instructions in this manual
before using this product.
Failure to follow all instructions
Safety Rules
Have the measuring tool
repaired only through qualified
specialist using original spare
parts. This ensures that the
safety of the measuring tool is
maintained.
Do not allow children to use
the measuring tool without
supervision.
unintentionally
persons.
Do not point the laser beam
at persons or animals and do
not look into the laser beam
yourself, not even from a large
distance.
Do not use the laser viewing
glasses as safety goggles. The
laser viewing glasses are used for
improved visualization of the laser
beam, but they do not protect
against laser radiation.
Do not use the laser viewing
glasses as sun glasses or
in traffic. The laser viewing
glasses do not afford complete
UV protection and reduce color
perception.
may result in hazardous radiation
exposure, electric shock, fire,
and/or bodily injury.
-5-
They
could
blind
other
Publicité
Table des Matières
