Keypad Lock - Siemens Gigaset A100 Notice D'utilisation

Settings
Ringtone
You can choose between two ringtones.
¦ ´
e.g. Ÿ¦

Keypad lock

When the keypad is locked, nothing happens if you inadvert-
ently press a key. You can continue to accept calls in the
usual manner.
ª
~~~~
Operating behind a PABX
If you operate your Gigaset behind a PABX, it may be neces-
sary to change the preset Dual Tone Multifrequency Dialling
(DTMF) procedure and flash times (please refer to the oper-
ating instructions of your PABX).
Use digits 1 to 4 to set the following:
1 DTMF , long flash 250 ms
2 DTMF , short flash 100 ms
3 DP (Dial Pulsing) 1.5/1
4
DP 2/1
a
¦ Þ
e.g. 4
¦
a
Did you enter the wrong number by mistake? Then press
the handset key
to standby.
Activate the function – the ringer sounds.
Select the ringtone (version 1 or 2) and
save.
Hold down for more than
1 second to activate/deactivate.
The display icon appears if active.
Press the handset key.
Activate the function.
Enter the desired setting (1 to 4).
Save the setting.
Press the handset key.
a
twice or wait until the display returns
11