1 .12 Technical Data; Rj Connections With Easycontrols - Helios KWL EC 200 W ET R Notice De Montage Et D'utilisation

Installation and Operating Instructions
m
ATTENTION
m
WARNING
m
WARNUNG
Compact wall-mounted units KWL EC 200/300 W ET R/L
Monitoring systems are always integrated in the unit supply cable! (see wiring diagram)
ATTENTION DANGER TO LIFE! The use of the external contact (function 1; enable/disable unit) of
the KWL-EM or the KWL-CO
not permissible .

1 .12 Technical data

KWL EC 200 W ET R/L
Voltage/Frequency
Rated current – ventilation
Rated current – pre-heater
Rated current – max. total
Elec. pre-heater (outlet) kW
Summer bypass
Standby losses
Electrical power feed to UV
Air flow rates V m 3 /h (3-4 levels)
Temperature operating range
Installation area temperature
Protection to
Installation kit weight
Connection acc. to wiring diagram
Enthalpy heat exchanger
KWL EC 300 W ET R/L
Voltage/Frequency
Rated current – ventilation
Rated current – pre-heater
Rated current – max. total
Elec. pre-heater (outlet) kW
Summer bypass
Standby losses
Electrical power feed to UV
Air flow rates V m 3 /h (3-4 levels)
Temperature operating range
Installation area temperature
Protection to
Installation kit weight
Connection acc. to wiring diagram
Enthalpy heat exchanger

1 .13 RJ connections with easyControls

Take note of the information in the "easyControls" user manual (No. 82200)
RJ45 RJ12
/ KWL-VOC as a shutdown method for underpressure monitoring is
2
1~ 230 V~/50 Hz
1 .2 A
4 .4 A
5,6 A
1 .0 kW (accessories)
auto (adjustable), with exchanger cover
Standby mode not possible
NYM-J 3 x 1 .5 mm 2
235 / . . . / 20
-20 °C to +40 °C
+5 °C to +45 °C
IP20
41 kg
SS-1042
Plastic
1~ 230 V~/50 Hz
2 .0 A
4 .4 A
6 .4 A
1 .0 kW (accessories)
auto (adjustable), with exchanger cover
Standby mode not possible
2
NYM-J 3 x 1 .5 mm
315 / . . . / 26
-20 °C to +40 °C
+5 °C to +40 °C
IP20
42 kg
SS-1042
Plastic
Fig .1
RJ10
3
Fig .2
RJ45 RJ12 RJ10
EN