Inserting Batteries - Sony IPT-DS1 Manuel D'utilisation

Inserting batteries

You can use the following batteries.
Two AA alkaline batteries
ˎ
Two AA Nickel-Metal Hydride batteries
ˎ
¦
Notes
Be careful not to touch the multi connector when holding this unit.
ˎ
You cannot use manganese batteries.
ˎ
¼
Tips
If you use an AC adaptor (sold separately), you do not need batteries (page 27).
1 Slide the ON/OFF (power) switch of this unit to OFF and then open the
battery cover.
2 Insert the batteries into the battery compartment according to the
marks inside the compartment.
3 Close the battery cover.
15-GB