Viscount Cantorum Trio Mode D'emploi page 110

User Manual
Program Change
Messages for selecting
programs in external modules. It also can be
received by the organ to recall combinations,
Tutti and Crescendo steps.
Data format: CnH mmH
Transmitted:
n=channel number
mm=Program Ch. number:00H–7FH (0–127)
Received:
n=channel number
mm=Program Ch. number:
00H (0): general HR
01H-06H (1-6): general combinations 1-6
60H (96): Tutti OFF
61H (97): Tutti ON
6AH (106): Plenum OFF
6BH (107): Plenum ON
6FH (111): Crescendo -- (OFF)
70H–7FH (112-127): Crescendo steps 1-16
-
Plenum in the Cantorum Trio only.
STANDARD SYSTEM EXCLUSIVE
MESSAGES
• Device Inquiry
Instrument information sent after switching on
and when a Device Inquiry Request is received.
Data format: F0H 7EH 00H 06H 02H 31H ffH
ffH mmH mmH xxH yyH zzH vvH F7H
F0H: Exclusive status
7EH: Universal Non Realtime message
00H: channel
06H: general information
02H: device ID reply
31H: Viscount ID
ffH ffH: device family code
mmH mmH: device family member code
xxH yyH zzH vvH: software version
F7H: End of Exclusive
• Master Fine Tuning
Parameter: Tuning
Video page: Main page
Data format: F0H 7FH 7FH 04H 03H vvH nnH
F7H
F0H: Exclusive status
7FH: Universal Realtime message
7FH: channel (any)
04H: Sub-ID #1=Device Control message
03H: Sub-ID #2=Master Fine tuning
vvH nnH: fine tuning value
00H 00H: A4=415,3 Hz
00H 40H: A4=440 Hz
7FH 7FH: A4=466,2 Hz
F7H: End of Exclusive
sounds, timbres
:0H–EH (1–15)
:FH (16)
• Temperament
or Parameter: Temperament
Video page: Main page
Data format: F0H 7EH 7FH 08H 08H 03H 7FH
7FH [ss] ... F7H
F0H: Exclusive status
7EH: Universal Non Realtime message
7FH: channel (any)
08H: Sub-ID #1=MIDI Tuning standard
08H: Sub-ID #2=scale/octave tuning 1-byte
form (Non Real-Time)
03H: channel/options byte 1
7FH: channel byte 2
7FH: channel byte 3
[ss]:12 byte tuning offset of 12 semitones
from C to B
00H: -64 cents
40H: 0 cents
7FH: +64 cents
F7H: End of Exclusive
VISCOUNT SYSTEM EXCLUSIVE
MESSAGES
Register on/off
•
Data format: F0H 31H snH xxH yyH F7H
F0H : Exclusive status
31H : Viscount ID
sH : switch
0H=voice off
4H=voice on
nH : channel number (0H – EH)
xxH : voice id – first byte
yyH : voice id – second byte
F7H: End of Exclusive
Tremulant Speed
•
Parameter: Spd
Video page: Style/ Tremulants
Data format: F0H 31H 2nH 5AH vvH F7H
F0H : Exclusive status
31H : Viscount ID
2nH : channel number (s=0H–EH)
5AH : tremulant speed
vvH : speed value (04H–20H)
F7H: End of Exclusive
-
This message is transmitted when the
Tremulant is switched on.
• Tremulant Depth
Parameter: Dpt
Video page: Style / Tremulant
Data format: F0H 31H 2nH 5CH vvH F7H
F0H : Exclusive status
31H : Viscount ID
2nH : channel number (s=0H–EH)
5CH : 1st tremulant depth
EN - 52