Sage the3X Bluicer Guide Rapide page 8

5. The safety locking arm should now
be in a vertical position and locked
into place on top of the juicer cover.
6. Slide the food pusher down the food
chute by aligning the groove in the food
pusher, with the small protrusion on the
inside of the top of the feed tube.
Food
pusher
groove
7. Place the pulp container into position by
tilting and lifting the motor base slightly.
Insert the pulp container under the juicer
cover on the back ensuring the front edge
is tucked under the back lip of the filter
bowl surround and the bottom edge is
clipped into the bottom of the motor base.
8
8. Drip stop plug can be fitted over juice
outlet nozzle. It then allows the outlet
to be plugged to prevent dripping
after juicing.
9. Optional: For juicing into a cup
the Juicing Nozzle can be fitted onto the
juice outlet nozzle.
Small
protrusion
inside
feed tube
10. Fit the lid to the blender jug and position
jug under juice spout.