Christopeit Sport TM 550S Notice De Montage Et D'utilisation page 20

Step 3:
Installation of the covers
1. Place the support covers left and right (19L+19R) at support
tubes (3L+3R) and secure the position with screws (57) onto
the base frame (1).
Step 4:
Checks and How to start
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, connect the power supply cable
(88) with wall power (220-240V~50-60Hz) and switch on the
main switch (86) below the front frame.
3. Put the safety key (81) onto the computer (14) and the
computer will show normal manual mode. Put the safety
clip (81) at your exercising cloth and stand on the side rails (36).
Press Start-Button and after a Count Down the treadmill
start moving. Start walking onto the walk surface (21) when
speed is slowly and follow the speed. Familiarize yourself
with the machine at a low speed settings.
4. Run in the middle of the running surface (21) and hold yourself
tight at handrail (4) if you feel insecure and don't step on the
side foot rails (36). Only run with look at the Computer on the
treadmill during the running. In emergency case, step of the
treadmill lateral and hold on to the handle (4).
5. If you like to use an external MP3 player for example, connect
with cable (90) and computer (14).
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
20