Replacement Accessories - Craftsman Quickwind CMCST920 Guide D'utilisation


WARNING:
sure that the Versatrack™ integral hang hook is
returned to its original position.
iMPORTAnT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwall system.
1. Turn tool off, remove the battery pack and
remove accessories.

CAUTION:
cutting teeth must have them covered securely if it is
to be on the Versatrack™ Trackwall.
2. Flip or pull open the integral hang hook
when locked into position.
3. Mount the integral hang hook to the
Versatrack™ Trackwall.
nOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Fig. N

Replacement Accessories


WARNING:
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can cause injury.

WARNING:
not recommended by CRAFTSMAN for use with this
appliance could be hazardous.

WARNING:
or any accessory or attachment other than those
recommended by CRAFTSMAN on this trimmer.
Serious injury or product damage may result.
When replacing the line, use .080" (2 mm) diameter line.
Use CRAFTSMAN replacement line Model No. CMZST080T5
or CMZST080TP. Other sizes may degrade performance or
cause damage to the trimmer.
Before using the tool make
Any product with exposed
. It clicks
26
26
To reduce the risk of
The use of any accessory
Do not use any blades,
Cleaning

WARNING:
of all air vents with clean, dry air at least once a
week. To minimize the risk of eye injury, always
wear ANSI Z87.1 approved eye protection when
performing this procedure.

WARNING:
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Helpful Cleaning Tips (Fig. O)
• Keep the air intake slots
• Your trimmer line can dry out over time.
• Plastic parts may be cleaned by using a mild soap and
a damp rag.
• The line cutter on the edge of the guard can dull over
time. It is recommended you periodically touch-up the
sharpness of the blade with a file.
Fig. O
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.

WARNING:
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and
replacement, when applicable) should be performed
by a CRAFTSMAN factory service center or a
CRAFTSMAN authorized service center. Always use
identical replacement parts.
English
Blow dirt and dust out
Never use solvents or other
clean to avoid overheating.
27
27
To assure product
11