The Manual Speaker Setup Menu; Manual Speaker Setup; Speaker Setting - Pioneer SX-319V Mode D'emploi

06

The Manual speaker Setup menu

Chapter 6:
The Manual speaker Setup
menu

Manual speaker setup

These setting optimize surround sound
performance.
If you are using the Pioneer S-
FCR3700 or S-FCR3300-K and S-W3700-K speaker
system, you can leave the Speaker setting and the
Subwoofer setting in the default settings.
You only need to make these settings once
(unless you change the placement of your
current speaker system or add new speakers).
RECEIVER
INPUT SELECT
ZONE 2
RECEIVER
ON/OFF TV CONTROL
INPUT
BD TV DVR
CD CD-R TUNER
1 Press RECEIVER on the remote control,
then press the SETUP button.
2 Select SP SETUP from the System Setup
menu.
Specify the size, number, distance and overall
balance of the speakers you've connected.
Use / to select the setting you want to
3
adjust then press ENTER.
• SP SET – Specify size / number of speakers
connected (see Speaker setting below).
• X.OVER – Specify which frequencies will
be sent to the subwoofer (see Crossover
network on page 31).
• CH LEVEL – Adjust overall balance of your
speaker system (see Channel level on
page 31).
Note
1 If you select SMALL for the front speakers the subwoofer is fixed to YES. Also, the center and surround speakers can't be set
to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
30
En
AUDIO TUNER EDIT
SOURCE PARAMETER
TOOLS
TOP MENU
MENU
ENTER ENTER
HOME HOME
CH MENU MENU BAND
SETUP RETURN RETURN
• SP DISTN – Specify the distance of your
speakers from the listening position (see
Speaker Distance on page 31).
4 Press RETURN after making the
adjustments necessary for each setting.

Speaker setting

Use this setting to specify your speaker
configuration (size, number of speakers).
1 Select SP SET from the SP SETUP menu.
Use / to choose the speaker(s) that
2
MASTER
VOLUME
you want to set then select a speaker size.
Use / to select the size (and number) of
each of the following speakers:
• Front (F) – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn't connect a
subwoofer. Select SMALL to send the bass
frequencies to the subwoofer.
• Center (C) – Select LARGE if your center
speaker reproduces bass frequencies
effectively, or select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn't connect a center
speaker, choose NO (the center channel is
sent to the other speakers).
• Surround (S) – Select LARGE if your
surround speakers reproduce bass
frequencies effectively. Select SMALL to
send bass frequencies to the other
speakers or subwoofer. If you didn't
connect surround speakers choose NO
(the sound of the surround channels is
sent to the other speakers).
1