Connecting The Multichannel Analog - Pioneer SX-319V Mode D'emploi

03 Connecting up
4 Connect the analog audio outputs from
your TV to the TV/SAT inputs on this receiver.
This will allow you to play the sound from the
TV's built-in tuner. Use a stereo RCA phono
cable to do this.
Connecting the multichannel analog outputs
For DVD Audio and SACD playback, your BD/DVD player may have 5.1 channel analog outputs. In this
case, you can connect them to the multi-channel analog outputs to the multi-channal inputs of this
receiver as shown below.
Note
1 In this case, you'll need to tell the receiver which digital input you connected the TV to (see Choosing the input signal on page 29).
2 The multichannel input can only be used when MULTI IN is selected (see page 29).
10
En
2
This receiver
HDMI
BD/DVD
IN
IR
IN
COAXIAL ASSIGNABLE
TV/SAT
IN
IN 1
(CD)
OPTICAL
IN 2
(DVR/VCR)
OUT
IN 1
(CD-R/TAPE)
ASSIGNABLE
DIGITAL 1 -
R L
CENTER
OUTPUT
SURROUND
OUTPUT
DVD/multi-channel decoder
with multi-channel analog
output jacks
• If your TV has a built-in digital decoder, you
can also connect an optical digital audio
output from your TV to the DIGITAL
OPTICAL IN 1 (CD-R/TAPE) input on this
receiver. Use an optical cable for the
1
connection.
AUDIO
OUT CD-R/TAPE IN CD IN
L
R
OUT DVR/VCR IN TV/SAT IN
L
ANTENNA
R
FM
UNBAL
75 Ω
SURROUND SURROUND CENTER CENTER FRONT FRONT
L L
AM
LOOP
R R
BD/DVD IN
SUBWOOFER SUBWOOFER
2 BD/DVD MULTI CH IN BD/DVD MULTI CH IN
R L
SUB-
WOOFER
FRONT
OUTPUT
OUTPUT