Dymo XTL 300 Guide De Démarrage Rapide page 11

Using the Label Maker with Your Computer
Your label maker can be used as a standalone label maker or you can print
labels directly from your computer using the latest version of DYMO ID
software.
Downloading and Installing DYMO ID
Do not connect the label maker to your computer until after the software
installation is complete.
To install the software
Download the latest version of DYMO ID
1
site at support.dymo.com.
Follow the instructions in the installer.
2
Connecting the Label Maker to your Computer
The label maker connects to your computer using the USB connection located
on the left side of the label maker.
Do not connect the label maker to your computer until after the software
installation is complete.
To connect the label maker to your
computer
Lift the connector cover on the left
1
side of the label maker and slide the
cover clockwise to expose the
connectors.
Plug the USB cable into the USB
2
connector on the label maker and
into an available USB port on your
computer.
You can now print directly from DYMO ID
maker for printing later.
™
Software
™
software from the DYMO Web
™
software or transfer labels to the label
™
9