The Oven Should Switch Off Automatically; The Oven Should Switch On And Off Automatically - Junker JB23UA0 Série Mode D'emploi

Note:
To prevent moisture from forming on the control panel, do not
leave the cooked food in the appliance.
Saving energy
You can switch off the appliance before the end of the cooking
time to save energy:
Before the end of the cooking time, turn the temperature
1.
selector back to the position.
Ú
When you want to take the cooked food out of the oven, you
2.
must first turn the function selector to the
Changing the settings
You can change the type of heating, temperature and grill
setting as required.

The oven should switch off automatically

Enter a cooking time for your dish.
Example in the picture:
%
time 45 minutes.
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Press the 0 clock button.
3.
The x Cooking time symbol flashes.
Use the + or - button to set the cooking time.
4.
Default value for + button = 30 minutes
Default value for - button = 10 minutes
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Changing the setting
Press the Clock button. Use the + or - button to change the
0
cooking time.
Cancelling the setting
Press the Clock button. Press the - button until zero is
0
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the 0 Clock button twice and make your settings as
described in point 4.
40
position.
Û
Top/bottom heat, 200 °C, cooking
K
PLQ
NJ
K
PLQ
NJ
0
The oven should switch on and off
automatically
Do not allow food to stand for too long in the oven. Meat and
fish spoils easily if not kept chilled.
Example in the picture: Top/bottom heating
10:45 . The meal takes 45 minutes to cook and should be
ready at 12:45 .
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Press the
3.
The Cooking time symbol flashes.
x
Use the + or - button to set the cooking time.
4.
Press the
5.
symbol flashes.
You can see in the display when the meal will be ready.
Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
button
0 clock button.
Clock button repeatedly until the
0
, 200 °C. It is
%
End time
y
K
PLQ
NJ
K
PLQ
NJ
button
0