Panasonic ES‑LA93 Manuel D'utilisation page 5

Charging with the self-cleaning
recharger
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
2
1
1
1 Insert the appliance plug into self-cleaning
recharger.
2
2
Plug in the adaptor.
3
3
Remove the protective cap and then attach the
shaver.
• Turn the shaver off before attaching.
• Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
• The indicators on the LCD panel glow and charging starts.
• Charging is completed when the indicators on the LCD panel
blink.
(Max. 1 hour later)
• You can keep the shaver attached to the recharger, or connected
to the adaptor, when not using it to maintain full battery capacity.
You cannot overcharge the shaver.
• If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
3
Charging without the self-cleaning recharger
You can also charge without the recharger.
1. Insert the appliance plug into the shaver.
. Plug in the adaptor into a household outlet.
5