Technical Specifications - Velleman CAMTVI14W Mode D'emploi

7.6 DAY&NIGHT
The camera can switch automatically between colour images in day
conditions and black-and-white images in night conditions. Use this function
to control the day/night behaviour of the camera.
Note: black-and-white images are much clearer and contain less noise at
low light levels.
7.7 COLOR
Use this menu to set the different colour adjustments.
7.8 DNR
Use this menu to set the digital noise reduction level.
7.9 IMAGE
Use this menu to adjust the image settings.
7.10 MOTION
Use this menu to adjust the motion detection settings.
7.11 SYSTEM
Use this menu to adjust the general system settings.
7.12 EXIT
Use this option to exit the menu without saving.
8.

Technical specifications

IP rating...................................................................... IP66
pick-up element .............................1/2.9" CMOS image sensor
pixels ................................................... 1920 (H) x 1080 (V)
resolution .......................................................... 1080P video
DSP .......................................... Techpoint & Eyenix EN-771 C
min. illumination ............................................ 0.001 lux/F2.0
IR LEDs.................................................. 2x high-power LEDs
IR-cut filter .................................................................... yes
max. IR projection distance ........................................... 30 m
S/N ratio ................................................... > 50 dB (AGC off)
lens ................................................................ f3.6 mm/F2.0
V. 01 – 27/02/2017
CAMTVI14W
6 ©Velleman nv