Faber INCA LUX Série Instructions D'installation page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3
ELECTRICAL INSTALLATION WITH CONNECTION CABLE
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet
near the appliance.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For Permanent wiring Installation-Use only
with Listed rangehood Wiring Box kit
sku # WIREBOX, manufactured by Faber.
4
1
10
For Non-Ducted Recirculation Option
2
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
Attach each charcoal filter to the black
grid on each side of the blower. Press the
charcoal filter tightly to the black grid on the
blower side and rotate the filter clockwise
(towards the front of the insert hood) until
it locks into place. Turn counterclockwise
(towards the back of the insert hood) to
remove.
Required Activated Charcoal Filter
Accessory - sku # - FILTER1
Long Lasting Activated Charcoal Filter
Accessory - sku # FILTER1LL
(purchased separately)
Max. 33
"
7/16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Inca lux inlx21ssvInca lux inlx28ssvInca lux inlx35ssv

Table des Matières