Chain Catcher - Husqvarna T540 XP II Manuel D'utilisation

Checking the brake trigger
• Place the chainsaw on firm ground and start it. Make
sure the chain does not touch the ground or any other
object. See instructions under the heading Starting
and stopping.
• Grasp the chainsaw firmly, wrapping your fingers and
thumbs around the handles.
• Apply full throttle and activate the chain brake by tilting
your left wrist forward onto the front hand guard. Do
not let go of the front handle. The chain should stop
immediately.
36 – English
MAINTENANCE
Throttle trigger lockout
• Make sure that the throttle trigger is locked at idle
setting when the throttle trigger lockout is released.
• Press the throttle lockout and make sure it returns to
its original position when you release it.
• Check that the throttle trigger and throttle lockout
move freely and that the return springs work properly.
• Start the chain saw and apply full throttle. Release the
throttle control and check that the chain stops and
remains stationary. If the chain rotates when the
throttle trigger is in the idle position, contact your
servicing dealer.

Chain catcher

• Check that the chain catcher is not damaged and is
firmly attached to the body of the chainsaw.