Maintenance - Tineco A10 Série Mode D'emploi

Maintenance

Note:
• Clean the dustbin and filters after each use.
• Use the cleaning tool to thoroughly clean the pre-filter when pink light blinking. To maintain
high performance, wash and dry the pre-filter monthly, replacing it every 6 months.
Wash and dry the HEPA filter every 3 months, replacing it every 12 months.
Dustbin and Mesh Filter
1
Press the dustbin release button to remove
the dustbin.
3
Mesh filter
Turn counter-clockwise to remove the
filters.
5
③
④
②
①
After cleaning, insert the clean pre-filter into
the mesh filter properly and it clicks into place.
Install the clean filter and dustbin back into
the main body, then close the dustbin flap.
2
Clean with a damp cloth, taking care to
prevent water entering the appliance main
body and battery.
4
Pre-filter
Clean the dustbin and mesh filter under cold,
running water. Air dry completely before
reinstalling.
12