Installing The Ribbon Cassette - Epson TM-U590 Manuel D'utilisation

Using the Power Switch Cover
WARNING:
If an accident occurs with the power switch
cover attached, unplug the power cord
immediately. Continued use may cause
fire.
The enclosed power switch cover keeps the
power switch from being pressed accidentally.
To use the cover, install it as shown in
2
illustration

Installing the Ribbon Cassette

Use the EPSON ERC-31 ribbon cassette. The use of any ribbon cassettes other
than those approved by Epson may damage the printer and will void the
warranty.
CAUTION:
Never turn the ribbon cassette's feed knob in the opposite direction of
the arrow marked on the cassette; otherwise the ribbon cassette may
be damaged.
1. Turn the printer on, and open the front cover by pulling up the tab on the
left side.
2. Be sure the print head is on the right side.
3. If a ribbon is already installed, remove it by grasping the end of the tab
and removing it from the printer.
4. Turn the cassette knob on the
cartridge in the direction of the arrow
2 or 3 times to remove any slack.
5. Insert the ribbon, and rotate the
cassette knob 2 or 3 more times, as
shown in illustration
6. Make sure the ribbon has no wrinkles
or creases and is installed below the
print head as shown on the label
inside the printer.
.
3
.
2
TM-U590/U590P User's Manual 7
English
3