Technical Data; Noise/Vibration Information - Bosch GWB 12V-10 Professional Notice Originale

(5) Release button for angle selection of drill head
(6) Battery charge indicator
A)
(7) Battery release button
A)
(8) Battery
(9) Handle (insulated gripping surface)
A)
(10) Screwdriver bit
A)
(11) Universal bit holder
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless angle drill/driver
Article number
Rated voltage
A)
No-load speed
Max. torque, hard/soft
screwdriving application ac-
A)
cording to ISO 5393
Max. screw diameter
Max. drilling diameter
– Steel
– Wood
Weight according to EPTA-
B)
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation and
during storage
Recommended rechargeable
batteries
Recommended chargers
A) measured at 20–25 °C with battery GBA 12V 2.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-1:
2
Drilling in metal: a <2,5 m/s , K = 1,5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
Bosch Power Tools
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
GWB 12V-10
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
3 601 C90 9..
power tool and application tools, keeping their hands warm,
V= 12
and organising workflows correctly.
-1
min 0–1300
Nm 11/3 Assembly
u
mm 6
mm 10
mm 10
Charging the battery (see figure A)
kg 1.3–1.5
u
°C 0 to +35
Note: The battery is supplied partially charged. To ensure
°C –20 to +50
the maximum performance of the battery, use the charger to
fully charge the battery before first use.
The lithium-ion battery can be charged at any time without
GBA 12V...
reducing its service life. Interrupting the charging process
does not damage the battery.
GAL 12...
u
GAX 18...
To remove the battery (8), press the release buttons (7) and
pull the battery downwards out of the power tool. Do not
use force to do this.
Follow the instructions on correct disposal.
Changing the tool (see figure B)
u
The drill spindle is locked when the on/off switch (4) is not
pressed. This makes it possible to change the application
2
tool in the drill chuck quickly, conveniently and easily.
Open the keyless chuck (2) by turning it in the direction of
rotation ➊ until the tool can be inserted. Insert the tool.
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Do not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
1 609 92A 4VC | (25.05.2020)
English | 13