Sony SCD-XE670 Mode D'emploi page 22

Listening to a Multi-channel Super
Audio CD (continued)
6
Turn lAMSL until the desired
item appears in the display.
Select the item from "CNTR BALANCE,"
"SURR BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the
Multi-channel playback mode (page 20), "SW
BALANCE" does not appear. Similarly, "CNTR
BALANCE" or "SURR BALANCE" does not
appear when you set the corresponding speaker to
"––."
7
Press lAMSL.
The balance adjustment display appears.
In stop mode, the test tone is output from
the selected speaker.
Example: When you select "SURR
BALANCE" during stop mode,
the test tone is output from the
front speakers and surround
speakers.
DISC
F R T : _ _ _ _ _ : S U R R
8
Turn lAMSL to adjust the output
level.
DISC
F R T : _ _ _ _ _ : S U R R
9
Press lAMSL.
The player status returns to Step 6.
Repeat Step 6 through 9 for more
adjustments.
10
Press MENU after you finish adjusting.
The display returns to the normal display.
22
US
Adjusting the output level from the
remote Z
You can adjust the output level of each speaker
from the listening position by using the
supplied remote.
1
Press LEVEL ADJ during playback or
stop mode.
During playback, go to Step 4.
2
Press ./> repeatedly until "TONE
ON" appears in the display.
3
Press ENTER.
The test tone issues from the speakers in
sequence with the speaker type appearing in
the display.
4
Press ./> repeatedly until the
desired item appears in the display.
Select the item from "CNTR BALANCE,"
"SURR BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the
Multi-channel playback mode (page 20), "SW
MULTI CH
BALANCE" does not appear. Similarly, "CNTR
S A C D
BALANCE" or "SURR BALANCE" does not
1 2 3 4 5
6 7 8 9 10
appear when you set the corresponding speaker to
"––."
5
Press ENTER.
The balance adjustment display appears.
In stop mode, the test tone is output from
MULTI CH
the selected speaker.
S A C D
1 2 3 4 5
Example: When you select "SURR
6 7 8 9 10
F R T : _ _ _ _ _ : S U R R
BALANCE" during stop mode,
the test tone is output from the
front speakers and surround
speakers.
DISC
MULTI CH
S A C D
1 2 3 4 5
6 7 8 9 10