Carson Bluster 500 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3. Always be aware of the rotating blades.
GB
During the operation of your new Bluster 500 helicopter the
main rotor and tail rotor will be spinning at a high rate of speed.
The blades are capable of inflicting serious bodily injury and
damage to you and to others. Be conscious of your actions and
be careful to keep your hands, face, eyes, and loose clothing
away from the blades and gears.
Always fly your model a safe distance from yourself and others
as well as nearby objects. Never take your eyes off the model
4. Keep your Bluster 500 helicopter away
from heat and humidity.
Your new Bluster 500 helicopter is a hi-tech electronic device;
never subject your model to temperature extremes, do not
leave your model in an automobile for extended times because
high temperatures can damage the delicate electronic and
plastic parts.
Charge mode and warning
Charge the Lithium polymer battery only with the supplied wall
charger. Observe the polarity of the battery and the charger
and ensure that the connection is correct, do not force the
connector or damage may result.
Please charge your battery prior to the first use so that you
start with a freshly charged battery. When the battery is
charged the LED will glow green, during charging the LED on
the charger will glow red.
To ensure safe operation do not charge the battery for
extended periods of time. Never leave the charger unattended
and never leave the charger on overnight. Adult supervision is
required during the charging of lithium batteries.
6
CARSON 3D Helicopter Bluster 500 · 50 050 7036
or leave it unattended while it is
turned on. Always turn off your
model, then your transmitter
after each flight.
The supplied 2400 mAH Li-Poly battery only should be charged
with the included Li-Poly battery charger only. Charging the
battery with a charger not designed specifically for lithium
batteries can cause fire or and explosion of the battery. Please
observe all safety instructions. If the battery ever becomes
puffy or is damaged dispose of the battery in a safe container
outdoors away from flammable materials.
1. Do not place the battery on or near to things which might
catch fire during the charging process.
2. Charge the lithium-polymer battery on a non-flammable
base, e.g. on a metal or stone plate.

Publicité

Table des Matières
loading

Table des Matières