Rexel Auto+ 60X Manuel D'utilisation page 5

Masquer les pouces Voir aussi pour Auto+ 60X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Lights and Icons Explained
Colour of symbol
Power switch off
Power switch on
Auto mode - On
Continuous Jam Boost mode
Reverse mode
Paper jam
Paper loading door open
Bin full
Bin open
Motor cooling down
Auto+ 60X Shredding Capability
Auto+ 60X CAN shred
the following:
Auto+ 60X CANNOT
shred the following:
LED Illumination
Cool Down
Power On
Red
Blue
light
light
light
light
light
light
light
light
light
light
• Stapled paper
• Paper clip paper
25mm within the corner
25mm within the corner
• 26/6 and 24/6 or smaller
• Capable of shredding small/
staples
medium (max. wire thickness
= 0.9 mm) paper clips
• Small sized paper loaded
centrally
• 60 sheets plain paper
• 60 sheets colour printing
• >100gsm paper (through
manual feed slot ONLY)
Heavy Duty Staples. Check the
A document with more than
staple leg length is not greater
25 sheets held together by a
than 6mm.
staple or clip.
Large clips. Check the length
Multiple folded sheets*
of the paperclip is not longer
(e.g. A3 sheets folded in half).
than 32mm.
Plastic sheets, laminated
Thick paper or card*
documents, plastic folders,
glossy paper or a sheet covered
with print on both sides.
• A3 folded in half
max. 2 sheets
• 60 sheets single sided printed
paper
• 80 gsm paper
- A4 - 210mm x 297mm
- A5 - 148mm x 210mm
- A3 single sheet folded in
half to make A4
Bound documents
Magazines or other documents
bound by multiple staples
or clips
Adhesive labels
* We recommend you feed these types of documents through the manual feed slot.
G
Although the Auto+
60X will accept
fastened sheets, Rexel
recommend that
staples and paper clips
are removed prior to
shredding to extend the
life of the product.
Bulldog clips
Unopened mail* e.g. junk mail.
Open mail and place in auto-feed
or feed through manual feed slot.
Crumpled paper*
5

Publicité

Table des Matières
loading

Table des Matières